Star Micronics PR921-24-A 9. RECOVERING FROM ERRORS (PAPER JAMS)

1 31

– 21 –

9. RECOVERING FROM ERRORS (PAPER JAMS)

Remove jammed paper according to the directions shown in Figure 9-1 and 9-2 to recover from non-recov-

erable paper jams. When doing so, always verify that the power has been turned OFF.

(Procedure 1)

1) Rotate the knob in the clockwise or counterclockwise direction.

2) Remove the jammed sheet from where it is easiest to remove.

(Paper inlet, discharge outlet, of the lower recovery space)

Jammed Paper

Inlet

Discharge Outlet

Knob Remove jammed paper

from the lower space.

Rotate

Figure 9-1

Contents

Main Page CONTENTS Page Page 3. PAPER SPECIFICATIONS (HEAT SENSITIVE PAPER) 4. PRESENTER SPECIFICATIONS Page Page Page * Soldering Time: Within 5 seconds Electrical Characteristics (at 25C) *1: No reflective material. *2: D is the thickness of the reflective mirror glass. Page Page 11 4.5.2 Example Circuit Note: Parts marked with an asterisk are not mounted. VM Page Figure 5-1 Unit: mm 13 Page 6. AMBIENT SPECIFICATIONS 7. RELIABILITY SPECIFICATIONS 8. SETTING PAPER AND USING THE ACCESSORIES Page Page Page 9. RECOVERING FROM ERRORS (PAPER JAMS) Right sideLeft side 10. PRECAUTIONS REGARDING OUTER COVER DESIGNS * * Page 11. MAINTENANCE Left side Right side 12. HANDLING THE PRESENTER Page Distributed by