PARTS REPLACEMENT
4.9 Terminal Board Unit
1.Remove
•Printer mechanism according to the procedure described in Section 4.2.
•The ten soldered lead wires1with the soldering iron.
•Two screws 2
•Terminal board unit 3
2.Adjust
•Column displacement
(Refer to Section 3.4.)
4.10 Carriage Motor Unit
1.Remove
•Printer mechanism according to the procedure described in Section 4.2.
•The two soldered lead wires1with the soldering iron. (black, red)
•Two screws 2
•Carriage motor unit 3
2.Adjust
•Printing speed (Refer to Section 3.3.)
•Column displacement (Refer to Section 3.4.)