Star Micronics TUP900 - page 11

Rev 0.01

TUP900 Series Specifications Manual 3-6

(7) Weight Shaft and Loop Guide on the Presenter Module

The TUP900 Series printers require the accessory weight shaft and loop guide for the thickness of the

paper to be used to ensure the smooth feeding of paper.

See the table below for the optimum mechanism status.

• When 65 µm ≤ Paper Thickness < 100 µm: Loop guide mounting required.

Weight shaft unnecessary

• When 100 µm ≤ Paper Thickness ≤ 150 µm: Weight shaft mounting required.

Loop guide unnecessary

Note 1) Refer to the PR921-24-A product specifications manual for details regarding the mounting

position of the loop guide and the weight shaft and how to mount them.

(8) Pre-printing Range on the Backside of Recording Paper

When pre-printing to the backside of recording paper, it should meet the following specifications.

(9) Others

• Coloring Side: Roll outer side

• Trailing Edge Processing: Do not glue to fasten to paper roll and shaft core.

The trailing edge should not be folded.

Printing Direction

Min. 15 mm from Paper Edge

Paper Back Side

Pre-printing Prohibited Range

Printing Surface is Paper Back Side

25 (mm)

10 (mm)

Paper Width Center

Contents

Main --- CONTENTS --- Page 1. GENERAL DESCRIPTION TUP9 9 2 24 J1 2. PRINTER CONFIGURATION 2-1 Basic Configuration 2-1-1 Thermal Mechanism Module 2-1-2 Presenter Module 2-1-3 Control Board Module 3. BASIC SPECIFICATIONS 3-1 Printing Specifications 3-2 Character Specifications and Bar Code Specifications 3-2-1 STAR Line Mode 3-2-2 STAR Page Mode 3-3 Paper Specifications 3-3-1 Thermal Paper roll Head Adjust Lever Fig. 3.3.1.6.A Normal Position Head Adjust Lever Fig. 3.3.1.6.B Position for Thick Paper Page 3-3-2 Black Mark Specifications Page 3-4 Thermal Mechanism Module 3-4-1 Thermal Head 3-4-2 Auto-cutter 3-4-3 Paper Feed Motor 3-4-4 Sensors Page 3-6 Paper Roll Supply Module 3-6-1 Paper Roll Holder 3-6-2 Near-end Sensor 3-7 Reliability Specifications 3-7-1 Thermal Mechanism Module 3-7-2 Thermal Head 3-7-3 Auto-cutter 3-7-4 Presenter Module 4. EXTERNAL SPECIFICATIONS Page 5. ENVIRONMENT SPECIFICATIONS 5-1 Temperature and Humidity 5-1-1 When Operating 5-1-2 When Stored (Excluding Paper roll) Page 6. SAFETY 6-1 Standard 7. USAGE EXAMPLE (LAYOUT EXAMPLE) 7-1 Control Board Layout 7-1-1 Control Board Layout 2 7-1-2 Control Board Layout 3 7-2 High Volume Paper Roll Supply (RHU-T900, Optional Part) Page Fi g . 7.2 RHU-T900 External Dimensions Dia g rams Page Fig. 7.2.2 Vertical Layout 8. SETTING UP THE PRINTER UNIT 8-1 Mounting the Units 8-1-1 Mounting the Printer Unit 8-1-2 Mounting the High Volume Paper Roll Supply (RHU-T900) 8-1-3 Mounting the Printer Unit and the High Volume Paper Roll Supply (RHU-T900) 8-2 Mounting the High Volume Paper Roll Supply (RHU-T900) 8-3 Adjusting the Paper roll Holder Unit 8-3-1 Handling 111.5 mm Paper Width 8-3-2 Handling 82 mm Paper Width 8-3-3 Handling 79.5 mm Paper Width Page 8-4 Mounting the Friction Spring 8-4-1 Using the Spring Base 8-4-2 When Not Using the Spring Base Fig. 8.4.1.C Fig. 8.4.1.A Touch to boss. Touch to boss. ABCC' B' A' Reference a Fig. 8.4.2.A For Paper Widths of 111.5 0.5 mm Fig. 8.4.2.B For Paper Widths of 82 0.5 mm Fig. 8.4.2.C For Paper Widths of 79.5 0.5 mm 8-5 Adjusting the Near End Sensor 8-5-1 Adjusting to the Paper roll Width 8-5-2 Adjusting to the Paper roll Diameter Direction Page Fig. 8.5.1.A Fig. 8.5.1.B Fig. 8.5.2.A Fig. 8.5.2.B 9. HANDLING THE PRINTER UNIT 9-1 Precautions Regarding Designs 9-2 Precautions for Handling 9-3 Precautions Concerning Safety 9-4 How to Set the Paper roll Page Page Fig.9.4.F Fig.9.4.E Damper rollers Paper inlet Paper guide 9-5 Performing Maintenance 9-5-1 Cleaning the Thermal Head and Platen 9-5-2 Handling Recording Paper Jams 9-5-3 How to Release the Cutter Lock Knob Release lever Lock lever 10. Control board module (TBD900 Series) Refer to the separate TBD900-24-A / PBD-9 Secification Manual for details. 2) Memory Switches Page Distributed by