Calibration

Troubleshooting

The following steps help troubleshoot in case Auto-Calibration procedures fail to give the correct reading or response.

Symptom:

 

Diagram #1

Auto-Calibration fluctuates.

 

1. Verify line voltage for sufficient voltage supply.

If wall voltage is less than 10% than what is required, this will cause speed fluctuation.

2. Verify unit is on a dedicated circuit breaker.

Treadmills sharing the same circuit line will cause intermittent problems and variation in speed.

3. Verify the following parameters are set correctly in the Configuration Mode:

(Configuration Mode details in Section 3)

CNT/RV : 31 = Magnetic/Cherry RPM Sensors

10 REV: 29.1” for 1.7” dia. motor pulley (110v)

10 REV: 35.8 for 2.1” dia. motor pulley (220v) NOTE: If not sure what your 10 REV settings should be, manually measure your drive motor pulley diameter. Above measurements are done in inches.

4. Verify RPM Sensor alignment.

Hall Effect/Cherry RPM Sensor is being used,

verify the gap is no more than 1/8 inch. NOTE: See Diagram # 1.

5. Adjust IR COMP potentiometer. NOTE: See Diagram #2, adjustment.

REPLACE: MCB if symptom continues.

4.5

Page 27
Image 27
Star Trac TR 4500 manual Calibration Troubleshooting, Diagram #1, Auto-Calibration fluctuates

TR 4500 specifications

The Star Trac TR 4500 is a premium treadmill that has been designed to meet the demands of both commercial gyms and personal fitness enthusiasts. Boasting a range of innovative features and cutting-edge technologies, the TR 4500 stands out as an essential piece of equipment for any serious workout regimen.

One of the most notable features of the TR 4500 is its powerful 4.0 HP motor, which ensures smooth and consistent performance, even during intense workout sessions. Whether you are walking, jogging, or running, the treadmill provides a reliable experience that can handle a variety of user inputs. The motor also supports a speed range of up to 12 mph, allowing users to customize their workouts according to their fitness levels.

The TR 4500 is equipped with a spacious running surface, measuring 22 inches wide by 60 inches long. This ample space allows users to move freely and comfortably, whether they prefer a brisk walk or an all-out sprint. Additionally, the treadmill features a patented Soft Trac shock absorption system that minimizes the impact on joints, making it ideal for users of all ages and fitness backgrounds.

Users will appreciate the treadmill's advanced console, which includes a large, easy-to-read display that tracks essential workout metrics such as time, distance, speed, incline, and calories burned. The console is also equipped with multiple pre-set workout programs that cater to varying fitness goals, whether it's weight loss, endurance, or interval training.

Technologically, the TR 4500 shines with its integrated Heart Rate Control system, which allows users to monitor their heart rates in real-time via contact sensors or wireless chest straps. This feature ensures users can maintain optimal heart rate zones for maximum effectiveness during their workouts.

Moreover, users can enjoy entertainment while they exercise, as the treadmill is designed to be compatible with various audio devices. This includes built-in speakers and a media tray for tablets and phones, enabling users to watch their favorite shows or listen to music as they run.

Durability is another hallmark of the TR 4500, with its commercial-grade construction that promises longevity, even in high-traffic environments. Whether for home use or in a gym, the Star Trac TR 4500 treadmill combines powerful performance, user-friendly features, and superior build quality, making it a top choice for serious athletes and fitness enthusiasts alike.