6.Attach the extensions (from the Rear bracket & extension kit) to both sides of the KVM switch module. Please note the length of the extensions and mount them as shown. For a 2U module, the extensions are mounted to the lower half of the module.
NOTE: the orientation of the wide side of the extension
7.The rear brackets, extensions and slide rails have a tight fit. Make sure you follow these steps for easy installation.
A.Slide the rear brackets onto the extensions.
B.Insert both sliding rails of the assembled drawer into the tight space formed by the rear brackets and the extensions. The KVM module should be pushed in evenly on both right and left sides.
Instruction Manual | 7 |
