StarTech.com PCI2S232485I Introduction, Installation, Packaging Contents, System Requirements

Introduction

The StarTech.com PCI to RS232/422/485 Serial Adapter Card is a universal all-in-one PCI Serial adapter card that allows you to turn a PCI or PCI-X slot into 2 serial ports capable of communicating in RS-232, RS-422, or RS-485. Featuring 2,500Vrms Isolation and 15KV ESD protection and two DB9 serial ports that can be independently configured to support RS-422, RS-485 2-wire, RS-485 4-wire, or RS-232 mode up to a maximum baud rate of 921.6Kbps per port.

Packaging Contents

•PCI2S232485I adapter card

•Driver CD

•Instruction Manual

System Requirements

•PCI enabled computer system with available PCI slot

•Microsoft® Windows® XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or Windows XP Embedded/POSReady 2009/CE 4.x/5.0, or Linux®

Installation

WARNING! PCI cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also be careful to handle the PCI card by its edges and not the gold connectors.

Hardware Installation

1.Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices.

2.Remove the cover from the computer case. Refer to documentation for your computer system for details.

3.Locate an open PCI or PCI-X slot and remove the metal cover plate on the rear of the computer case.

Instruction Manual

1