StarTech.com PCI2S650PW, PCI4S650PW instruction manual Specifications, Instruction Manual

Instruction Manual

2.Double click System.

3.Click the Hardware tab.

4.If the card does not appear with a red x or yellow exclamation point (!) next to it, Windows has not detected a problem with the installation and the card should function normally.

Windows 2000/XP/2003

1.Go to Start > Settings > Control Panel.

2.Double click System.

3.Click the Hardware tab and choose Device Manager.

4.If the card does not appear with a red x or yellow exclamation point (!) next to it, Windows has not detected a problem with the installation and the card should function normally.

Specifications

Card Interface			32-bit PCI (5v), 64-bit PCI-X (3.3v)
FIFO Size			128 KBytes software, 32 bytes hardware
Max. Data Transfer Rate			920 Kbits/sec., supports half and full duplex
Connectors			1 x proprietary 44-pin (female) to dongle
			2 x DB9 (male) to peripherals (PCI2S650PW)
			4 x DB9 (male) to peripherals (PCI4S650PW)
			1 x internal SP4 (male) power connector
Signals Supported (RS-232)			TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND (see below for pinout)
Power to Peripherals			5 or 12 volts to peripheral supported over DB9 connection
OS Support			Windows 2003 Server, XP, 2000, NT, ME, 98, 95, DOS/Windows 3.1, Linux
			(Driver support included for 64-bit editions of Windows 2003 and 2000 Server.)
Operating Tolerances			32º~135ºF (0º~57ºC), 5~95% rel. humidity
UART Chipset			Sunix SUN1889 (16C650 compliant)
Certifications			Regulatory: FCC Class B, CE		Other: Microsoft WHQL
				Pin		DB9	DB25
1						Assignment	Assignment
				1		DCD	NC
				2		RD	TD
				3		TD	RD
				4		DTR	RTS
1	9			5		GROUND	CTS
				6		DSR	DSR
				7		RTS	GROUND
				8		CTS	CD
				9		RI / 5V / 12V	n/a
		25
				20		n/a	DTR
				22		n/a	RI / 5V / 12V
					(Any unshown pins are not used.)

6