6
DOS
When installing multiple cards in DOS, it is important to install the card designated card Number 1 (with the jumper ON) first.
1.Change your active directory to the target directory: ex: c:\RAYON
2.Insert the driver disk into the disk drive and copy the DOS files from the driver diskette:
ex: xcopy /s/e/v a:\DOS\*.*
3.Run the driver installation command: ex: c:\rayon\pciport
4.The cards will now be installed in your system. Each card will show the card number in the system (for the application to specify the target card and target port), the card model, the card jumper setting (for card number 1 or 2), the IRQ assigned, and the COM port number for the card.
You may see the following error messages:
•PCIPORT already installed. This means the driver has already been installed.
•Please check the “JP1”. This means that both cards in the system have their jumpers ON.
•PCIPORT not in system. There is no card in the PCI slot.
Notes:
•The driver function call description can be found on the DOS driver diskette. There is also a DEMO program for the user to meet their target application program.
