StarTech.com PCISATA4R1 manual Accessing the RAID Bios Utility

Accessing the RAID BIOS Utility

The PCISATA4R1 comes with an integrated BIOS-level configuration utility that allows you to configure the RAID setup, rebuild your array in the event of failure, and resolve conflicts with the arrays you have setup. Once you have installed the card according to the instructions and attached the SATA drives you wish to use with the card, you can then configure the type of array you would like to use.

To enter the configuration utility, press and hold [CTRL] and [S] at the same time (or press [F4]) when you see the following prompt:

NOTE: At least one SATA drive must be installed for you to access the RAID BIOS utility. Once you access the utility, you will be presented with the following menu:

Instruction Manual

3