StarTech.com PEX1P For Windows XP/Server 2003/XP-x64/Server, For Windows Vista/Vista-x64

Instruction Manual

5.Click Next.

6.Click Finish to complete the driver installation.

For Windows® XP/Server 2003/XP-x64/Server 2003-x64

1.Insert the Driver CD into the CD-ROM drive.

2.At the Found New Hardware Wizard, select Install the software automatically (Recommended), then click Next.

3.If a Hardware Installation warning pops up indicating that the driver software has not been digitally signed, click Continue Anyway, then click Finish to complete the driver installation.

For Windows® Vista/Vista-x64

1.Insert the Driver CD into the CD-ROM drive.

2.At the Found New Hardware Wizard, select Locate and install driver software (recommended).

3.Click Next to continue to setup.

4.The Add New Hardware Wizard will now ask you Would you like to install this device software?. Click Install to continue.

5.Click Close once driver installation is complete.

To Verify Windows® Driver Installation

To verify that the necessary software has been installed, Click on the Device Manager tab in System Properties, which you can be accessed through the Control Panel or by following these steps:

1.Right-click on My Computer and select Manage.

2.In the left pane of the Computer Management window, click on Device Manager.

You should see one PCI Express ECP Parallel Port … installed under Ports (COM & LPT) item.

3