Manuals / StarTech.com / Computer Equipment / Network Card

StarTech.com PEX2EC35 manual Installing the 3.5” Bay, Instruction Manual

Models: PEX2EC35

1 11

Download 11 pages 62.64 Kb

Page 6

Image 6

Instruction Manual

Installing the 3.5” Bay

1.Connect the Power, USB Type-B-to-10-pin-Header Adapter Cable (optional) and DVI like Expansion Cable to the appropriate connectors on the rear panel of the 3.5” ExpressCard Bay:

2.Remove the cover from a 3.5” drive bay, on the front panel of the host computer case, then feed the remaining ends of the cables used in step #1 through the open bay:

Page 6

Image 6

StarTech.com PEX2EC35 manual Installing the 3.5” Bay, Instruction Manual

Contents

PEX2EC35 3.5” Drive Bay PCI Express to Expresscard AdapterFCC Compliance Statement Warranty Information Instruction ManualTable of Contents InstallationIntroduction FeaturesPackage Contents Instruction ManualInstallation Installing the PCI Express CardInstruction Manual Installing the 3.5” Bay Instruction ManualInstruction Manual 3. Continue to feed the cables into the computer case through the open drive bay, until the ExpressCard Bay is near the opening, then press the ExpressCard Bay into the case so that it is flush with the face of the computer caseCard at this time, please do so prior to booting up the computer Instruction ManualInstruction Manual SpecificationsConnectors Bus TypeInstruction Manual Warranty InformationTechnical Support Limitation of Liability