Operation
RAID Configuration
Card BIOS Method
WARNING! Creating a RAID virtual disk destroys all data on the physical disks included in the virtual disk set. Make sure to back up all data before continuing.
1.When prompted on startup, press Ctrl+M to enter the card BIOS utility
Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_
2.Using the arrow keys to navigate, move to “HBA0: Marvell 0” and press Enter to select
3.Press Enter again to open the Configuration Wizard
4.Use the arrow keys to scroll through the list of free physical disks to select the drives that will be part of the RAID set. Press Space to
NOTE: When a disk is selected, an asterisk (*) appears to the left of the disk label.
5.After selecting the required disks, press Enter to continue.
Instruction Manual
8