Instruction Manual
Hardware Guide
B D
G
A C
E
F
Please Note: There are six SATA ports available on PEXSATA24E, 4 internally and 2 eSATA connectors externally. Based on the images above, the respective ports have been named A through F. Ports A to D are internal SATA ports, while ports E and F are external SATA ports. By changing the jumper setting on PEXSATA24E circuit board, you will be able to utilize four of the ports simultaneously. Please designate which ports you wish to use, by adjusting jumper settings according to the chart below. By default, Port A, B, C and D are working.
| G (Jumper Settings) | ||
|
|
| |
JP | Description | Active Port | |
|
|
| |
Enable SATA Connector D | |||
|
| ||
Enable SATA Connector E | |||
| |||
|
|
| |
Enable SATA Connector C | |||
|
| ||
Enable SATA Connector F | |||
| |||
|
|
|
2