StarTech.com SATSAS225ODD, SATSAS425BK instruction manual Packaging Contents, System Requirements

Instruction Manual

4 Drive Removable 2.5in SATA/SAS Backplane

Dual 2.5in SATA/SAS Removable Hard Drive + Slim Optical Drive Backplane

SATSAS425BK

SATSAS225ODD

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

•1 x 5.25in bay backplane

•1 x SATA to LP4 Molex power cable

•1 x Set of keys

•1 x Package of mounting screws

•1 x Instruction Manual

System Requirements

•Computer case with available 5.25in front bay

•Available SATA or LP4 Molex power connector from power supply

•Internal SATA or SAS controller

NOTE: SATA drives can be used on SATA or SAS controllers, but SAS drives can only be used on SAS controllers

•SFF-8087 mini-SAS cable

•7-pin SATA cable (SATSAS225ODD only)

SATSAS225ODD

*actual product may vary from photos

For the most up-to-date information, please visit: www.startech.com

SATSAS425BK

*actual product may vary from photos

Installation

5.25in Backplane

1.Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices.

2.Remove the cover from the computer case, including any covers for the 5.25in front bay. Refer to documentation for your computer system for details.

3.Insert the 5.25in backplane into the front bay. Align the mounting holes along the sides of the backplane, with the mounting points of the computer case’s 5.25in bay.

4.Fasten the backplane to the computer case (see documentation for the computer case for details).

5.Connect an available LP4 Molex power connector from the system power supply to the rear of the backplane.

NOTE: If the computer system only has SATA power connectors, use the included SATA to LP4 Molex adapter cable.

6.Connect an SFF-8087 cable into the rear of the backplane and connect the other end to the SATA or SAS controller.

7.SATSAS225ODD: To use the optical drive bay, connect an additional SATA 7-pin cable from the rear of the backplane to a SATA controller port.

8.Place the cover back onto the computer case.

9.Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1.

Manual Revision: 06/07/2011