Optical Drive (SATSAS225ODD only)
1. Remove the cover for the optical bay on the backplane
2. Firmly insert the Slimline SATA optical drive into the bay until it makes contact.
Hard Drive Tray
1.Ensure the drive tray is unlocked (key turned counter clockwise).
2.Slide the door release latch to open the release arm, and pull the tray out of the bay.
3.Secure the 2.5in hard drive to the tray from the bottom with the provided mounting screws.
4.Slide the drive tray back into the bay and close the release arm.
5.Lock the drive tray (key turned clockwise).
Specifications
| SATSAS425BK | SATSAS225ODD | |
Drive Bays | 4 (2.5in) | 2 +1 (2.5in + slim ODD) | |
Host Interface | SATA 6 Gbps | ||
SAS 6 Gbps | |||
| |||
| 1 x | 1 x | |
External Connectors | 1 x SATA | ||
1 x LP4 Molex male | |||
| 1 x LP4 Molex male | ||
|
| ||
LEDs | 4 x Drive Power/Activity | 2 x Drive Power/Activity | |
Fans | 1 x 40mm | ||
|
| 2.5in SATA/SAS hard drives up to | |
Compatible Hard Drives | 2.5in SATA/SAS hard drives up to | 15mm in height | |
15mm in height | Slimline SATA optical drive | ||
| |||
|
| (non OEM) | |
Insertion Rating | 3, 000 cycles | ||
Key Lock |
| Yes | |
Temperature Alarm |
| No | |
Enclosure Material |
| Metal | |
Operating Temperature | 5°C ~ 80°C (41°F ~ 176°F) | ||
Storage Temperature | |||
Humidity | 8% ~ 90% RH | ||
Dimension (LxWxH) | 153.0mm x 146.0mm x 42.0mm | 153.0mm x 146.0mm x 42.0mm | |
Weight | 536g | 470g | |
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits,loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
