StarTech.com SV431DVIUAHR manual “FUNC” Button, Step, Instruction Manual

Instruction Manual

“FUNC” Button

To ensure optimal video signal strength corresponding to the length or quality of the DVI cable being used, the user can press the “FUNC” button in combination with the other pushbuttons.

Step 1.

Press the “FUNC” button three times. The “FUNC” LED will flash one time per second.

Step 2.

Press “1” once or twice to adjust the equalization of the selected port input video strength. One beep will sound to indicate normal operation or two beeps to indicate enhanced mode.

or

Press pushbutton “3” once or twice to adjust the output current of selected port. One beep will sound to indicate normal operation or two beeps to indicate enhanced mode.

or

Press pushbutton “4” one, two, three or four times to adjust the output emphasis of the selected port, with one beep (no pre-emphasis), two beeps (low pre-emphasis), three beeps (medium pre-emphasis), or four beeps (high pre-emphasis).

Step 3.

Once the desired settings are complete, press the “FUNC” button once to exit the settings mode.

6