Instruction Manual
To select the audio signal from any port of 4 connected computers, the user can press “FUNC” button in combination with the other pushbuttons.
Step 1.
Press and hold the “FUNC” button. Either all 4 green LEDs will illumi- nate or just one green LED. If all four LEDs illuminate, the audio port is operating on the same channel as the selected computer. This is known as “tracking mode.” If just one green LED (the selected audio port) is illuminated, the audio port is not on the same channel as the selected computer (referred to as
Step 2.
While the “FUNC” button is being held down, press the pushbutton that corresponds with the audio port you wish to select.
or
While the “FUNC” button is being held down, press and hold “1” AND “2” to enter tracking mode.
Step 3.
Once the desired setting changes have been made, release “FUNC” but- ton to exit the settings mode.
7
