StarTech.com SV831SUN user manual Initial Power-Up, Adapter and monitor connection

6

For SUN computers using a 13W3 connector for monitor connection, a 13W3-to-HDB15adapter is required for such computer’s monitor port as shown in figure 6.

Figure 6: Adapter and monitor connection

Initial Power-Up

Make sure all computers and StarViews are powered down during installation. You must power up the Master StarView before turning on any other devices.

￿For single StarView configuration:

1)Apply a power adapter to the Master.

2)Turn on computers.

￿For cascade StarView configuration:

1)Apply a power adapter to the Master.

2)Apply power adapters to all Slaves.

3)Turn on computers.

Note: You may hot plug additional powered-down computer and Slave without turning any existing StarView or computer off after initial power up.