
SETUP H/W .3
Settings Motherboard
3. HARDWARE SETUP
Motherboard Feature SettingsThe motherboard’s onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch’s position. The example below shows all the switches in the OFF position.
| DSW |
| |
|
|
| 5 |
|
|
| 4 |
|
|
| 3 |
|
| ON | 1 2 |
|
| ON | OFF |
® |
|
|
|
1. Frequency Selection | |||
| 2. | Frequency Selection | |
| 3. | Frequency Selection | |
| 4. | Frequency Selection | |
5. | Frequency Selection. | ||
|
|
|
This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.Setting | JEN |
|
|
|
Disable (Jumper) |
|
|
| |
Enable (JumperFree) |
|
|
| |
| DSW | 5 |
| |
|
|
|
| |
|
|
| 4 |
|
|
|
| 3 |
|
|
| ON | 1 2 |
|
|
|
| OFF |
|
® |
|
|
|
|
|
|
|
| |
| 1 | 2 | 2 | 3 |
| Disable | Enable | ||
| JEN (default) | |||
|
|
|
18 | ASUS |