Introduction, Table of Contents | State Industries 184748-001

INTRODUCTION

Thank You for purchasing this water heater. Properly installed and maintained, it should give you years of trouble free service.

Abbreviations Found In This Instruction Manual:

•ANSI -American National Standards Institute

•ASME - American Society of Mechanical Engineers

•GAMA - Gas Appliance Manufacturers Association

•NEC - National Electrical Code

•NFPA - National Fire ProtectionAssociation

•UL - Underwriters Laboratories Inc.

PREPARING FOR THE INSTALLATION

1.Read the “General Safety” section of this manual first and then the entire manual carefully. If you don’t follow the safety rules, the water heater will not operate properly. It could cause DEATH, SERIOUSBODILYINJURYAND/ORPROPERTYDAMAGE.

This manual contains instructions for the installation, operation, and maintenance of the electric water heater. It also contains warnings throughout the manual that you must read and be aware of. All warnings and all instructions are essential to the proper operation of the water heater and your safety. Since we cannot put everything on the first few pages, READ THE ENTIRE MANUAL BEFORE

ATTEMPTING TO INSTALL OR OPERATE THE WATER HEATER.

This appliance has been Listed as complying with U.L. Standard for Safety UL 174.

2.The installation must conform with these instructions and the local code authority having jurisdiction and the requirements of the power company. In the absence of code requirements follow the current edition of the NEC, National Electrical Code, NFPA-70 which may be ordered from: National Fire Protection Association, 1 Batterymarch Park, Quincy, MA02269.

3.If after reading this manual you have any questions or do not understand any portion of the instructions, call the local utility or the manufacturer whose name appears on the rating plate.

4.Carefully plan the place where you are going to put the water heater.

INSTALLATION OR SERVICE OFTHIS WATER HEATER REQUIRES ABILITY EQUIVALENT TO THAT OFA LICENSED TRADESMAN IN THE FIELD INVOLVED. PLUMBINGAND ELECTRICALWORKARE REQUIRED.

Examine the location to ensure the water heater complies with the “Facts to Consider About the Location” section in this manual.

5.For California installation this water heater must be braced, anchored, or strapped to avoid falling or moving during an earthquake. See instructions for correct installation procedures. Instructions may be obtained from California Office of the State Architect, 400 P Street, Sacramento, CA 95814.

6.Massachusetts Code requires this water heater to be installed in accordance with Massachusetts 248-CMR 2.00: State Plumbing Code and 248-CMR 5.00.

SAFE INSTALLATION, USE AND SERVICE	2	FOR YOUR INFORMATION	14
GENERAL SAFETY	3	Thermal Expansion	14
INTRODUCTION	4	Strange Sounds	14
Preparing for the New Installation	4	Operational Conditions	14
TABLE OF CONTENTS	4	Smelly Water	14
TYPICAL INSTALLATION	5	“Air” in Hot Water Faucets	14
MIXING VALVE USAGE	6	High Water Temperature Shut Off System	14
LOCATING THE NEW WATER HEATER	7	PERIODIC MAINTENANCE	15
Facts to Consider About Location	7	Anode Rod Inspection	15
Insulation Blankets	7	Temperature-Pressure Relief Valve Operation	15
INSTALLING THE NEW WATER HEATER	7	Draining	15
Water Piping	7-8	Thermostat Removal/Replacement	15-16
Water Piping Pressure Test	8	Element Cleaning/Replacement	16-18
Temperature-Pressure Relief Valve	8-9	Drain Valve Washer Replacement	18
Filling the Water Heater	9	Service	18
T & P Valve and Pipe Insulation (Selected Models) ..	10	LEAKAGE CHECKPOINTS	19
WIRING DIAGRAMS	11	TROUBLESHOOTING GUIDELINES	20
WIRING	12	REPAIR PARTS LIST	21
TEMPERATURE REGULATION	13	NOTES	22-23
Temperature Adjustment	13	WARRANTY	Insert

184748-001 specifications

State Industries 184748-001 is a prominent water heater model that exemplifies advanced engineering and efficiency in residential and commercial applications. With a focus on reliability and energy savings, it is designed to meet the diverse needs of users while ensuring optimal performance.

One of the main features of the 184748-001 is its innovative insulation system. The water heater is equipped with high-density foam insulation that minimizes heat loss, which not only improves energy efficiency but also reduces operating costs. This feature makes it a suitable choice for those looking to lower their utility bills while still enjoying a consistent supply of hot water.

The 184748-001 utilizes a robust heating element that guarantees rapid recovery rates, ensuring that hot water is always available when needed. This model houses a powerful electric heating element that is designed for longevity and efficient operation. As a result, even during peak usage times, users can expect to have a steady flow of hot water, making it ideal for households with high demand or commercial applications.

In terms of capacity, the model can accommodate various needs, featuring a range of tank sizes to suit different households and facilities. Whether you're outfitting a large family home or a small business, the versatility of the 184748-001 allows it to adapt to a multitude of settings, ensuring that it meets the specific demands of each environment.

Another characteristic of this water heater is its user-friendly digital control panel. This feature allows for precise temperature adjustments, making it convenient for users to customize their hot water experience according to personal preferences. The digital interface also includes energy monitoring capabilities, providing insights into consumption patterns that help users make informed decisions regarding their energy usage.

Furthermore, State Industries has prioritized safety in the design of the 184748-001. Equipped with multiple safety features such as temperature and pressure relief valves, this model ensures that the system operates within safe parameters, reducing the risk of accidents and enhancing user confidence.

In summary, the State Industries 184748-001 water heater stands out for its combination of energy efficiency, robust performance, and user-friendly technologies. With its focus on safety and adaptability, it represents a smart investment for those seeking reliable hot water solutions for their homes or businesses.

State Industries 184748-001 instruction manual Introduction, Table of Contents

Models: 184748-001

INTRODUCTION

TABLE OF CONTENTS

184748-001 specifications