State Industries CSB 82 warranty Commercial, Other Standard Features, Options, MODELS CSB 52, 82

MODELS

CSB 52, 82, 120

SURFACE MOUNT THERMOSTATS

(OPTIONAL)

For more information on this product contact: State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

COMMERCIAL

SANDBLASTER

COMMERCIAL ELECTRIC WATER HEATERS

Designed for use as a recovery heater having its own storage tank. Note: Not recommended for sanitizing water application.

FEATURES

Meets or exceeds the requirements of ASHRAE 90.1b -1992 and ASHRAE/IESNA 90.1-2004.

GOLD ELEMENTS - CSB models ship with the gold plated elements (see element availability chart on back). Patented gold elements provide long life and superior scaling resistance. Low watt density means lower surface temperature to minimize scale buildup and more surface to heat water. Gold elements carry a one-year warranty against failure due to lime scale build-up.

GLASS-LINED TANK - Three sizes: 50, 80 and 119 gallon capacity. Tank interior is coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is vermin proof.

FUSING - Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electrical Code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 amps.

STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta. Convertible from three-phase to single -phase (in field) and vice versa. 277V single-phase also available.

TERMINAL BLOCK - Factory installed. Just bring the service to the heater and connect to block.

CONTROLS - One temperature control (adjustable through a range of 120° to 180°F) and manual reset high temperature cut-off per element. Thermostat step control may be achieved by varying settings on individual temperature controls. Located behind hinged control compartment door for quick, easy access.

OTHER STANDARD FEATURES -

Ŷ Surface mounted thermostats Ŷ Simplified circuitry, color coded for ease of service Ŷ Two anode rods for maximum corrosion protection Ŷ Cabinet has bonderized undercoat with baked enamel finish Ŷ Bottom inlet and top outlet openings Ŷ Brass drain valve Ŷ CSA / ASME temperature and pressure relief valve Ŷ Single panel control box. Ŷ THREE YEAR LIMITED TANK WARRANTY - For complete warranty information, consult written warranty or contact State Water Heaters.

OPTIONS -

ŶUL and cUL listed conversion kits to adjust voltage and kW requirements in the field before and after installation Ŷ ASME 150 psi tank construction Ŷ International voltages - 220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements

ŶMANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205, three heaters- part # 9003430205 and four heaters- part # 9003431205

SOLID.STATE.

SCESS00508 September 2010R