State Industries warranty Premium Heavy Duty Electric Water Heater, Limited Warranty Outline

Premium Heavy Duty Electric Water Heater

■ Meets or exceeds the requirements of ASHRAE/IES-90.1-1999.

■ ASME Tank Construction – 125 psi working pressure (65 thru 120 gallons), 150 psi working pressure (5 thru 50 gallons).

■ Foam Insulated – To meet rigorous state codes.

■ Glass-Lined Tank – Ten tank sizes available; 5 to 120 gallon. Tank interior is coated with glass specifically developed for water heater use. Tank cabinet has a baked enamel finish.

■ Incoloy Immersion Heaters – Heavy-duty medium watt density elements (three/immersion heater) have incoloy sheathing and prewired leads: provide excellent protection against oxidation and scaling. Input ranges from 3KW to 90KW available (see accompanying chart).

■ Standard Voltages – 208, 240 and 480 volt single and three phase. Single phase 208 and 240 are convertible to three phase. All 208 and 240 volt at 24KW and below are supplied phase convertible (single to three and vice versa). 277 volt single phase also available. Consult factory for 120 volt power circuit availability.

■ Terminal Block – To accept copper or aluminum leads (on units with more than one contactor).

■ Immersion Thermostat – Close differential immersion type thermostat provides the accurate temperature control required for commercial applications (adjustable through a range of 95° to 180°F).

■ 120 Volt Control Circuit – 120 volt control circuit powered by fused transformer.

■ Magnetic Contactors – Heavy-duty UL rated for 100,000 cycles.

■ Power Circuit Fusing (120 amp current draw and above) – Meets National Electric Code and UL requirements that water heaters must have internal fusing when current draw exceeds 120 amps.

■Limited Warranty Outline

–If the tank should leak any time during the first three years, under the terms of the warranty. State Water Heaters will repair or replace the heater; installation, labor, handling and local delivery extra.

–This Outline Is NOT A Warranty. For complete information, consult the written warranty or State Water Heaters.

–Warranty does not apply to product installed out-side of the United States of America or its territorial possessions and Canada.

■Other Standard Features

–Simplified circuitry, color-coded for ease of service

–Anode rod for corrosion protection

–Immersion manual reset high limit

–Brass drain valve

–Hinged control compartment door

–ASME T & P relief valve

■Optional International Voltages - 380, 415, 575 and 600 volts three-phase available with Y connected elements.

COMMERCIAL 500 Lindahl Parkway, Ashland City, TN 37015 • www.stateind.com

The Expert’s Choice®