![](/images/new-backgrounds/1328851/32885123x1.webp)
5.2 KNOWING YOUR VALVES
Yukatatâ„¢ kayak uses three types of valves. Type I (Type II, is a smaller version) to inflate floor and main chambers. Type IV is used to fill small chambers such as spray rings and spray deck lifters.
Type I (II)
Valve
Cap
| To inflate | |
Welded | . | |
To deflate | ||
Reciprocal |
Type IV
Twist to inflate/deflate
5.3 MAKE SURE:
1.Air chamber valves are centered with the inflation valve cover
2.Upper and lower weld seams of the air chambers are running parallel
with the cover and centered all around
If the air chambers are not aligned or centered: A. Relieve air pressure
B. Unzip the cover C. Partially inflate
D. Realign air chambers, zip cover and inflate chambers
3.All valves are closed tightly
4.Bow and stern frame assembly are aligned
10