Figure 1: Structural Steel Support Requirements |
|
| |
| Structural steel |
|
|
2 X 2 angle | B |
| B |
|
|
| |
to support |
|
|
|
tower basin, | D |
|
|
flush with top |
| A | |
|
| ||
of structural |
|
| |
|
|
| |
steel rails |
|
|
|
C | C | C | C |
|
| TSE50 |
|
Model |
|
| A |
|
|
| B |
|
|
| C |
|
| D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
number |
| in. |
| cm |
| in. |
| cm |
| in. | cm |
| in. | cm |
SF2003 | 52 |
| 132.1 | 50 |
| 127.0 | 16 | 40.6 | 78 | 175.3 | ||||
SF2004 | 52 |
| 132.1 | 50 |
| 127.0 | 16 | 40.6 | 78 | 175.3 | ||||
SF2005 | 68 |
| 172.7 | 67 |
| 170.2 | 22 | 55.9 | 78 | 175.3 | ||||
SF2007 | 68 |
| 172.7 | 67 |
| 170.2 | 22 | 55.9 | 78 | 175.3 | ||||
SF2009 | 87 |
| 221.0 | 85 |
| 215.9 | 28 | 71.1 | 78 | 175.3 | ||||
SF2011 | 87 |
| 221.0 | 85 |
| 215.9 | 28 | 71.1 | 78 | 175.3 | ||||
SF2015 | 87 |
| 221.0 | 85 |
| 215.9 | 28 | 71.1 | 78 | 175.3 |
Note: The illustration in Figure 1 shows structural steel with spacing for two (2) cooling towers. Your installation may vary.
Dimension A – Centerline for fiberglass mounting feet provided with cooling tower. This is so bolt holes can be made to secure the tower to the structural support.
Dimension B & C – Location of basin support steel.
Dimension D – Provides proper distance of 60” between cooling towers and distance between cooling tower and the wall of a building.
Fiberglass Cooling Towers | Chapter 3: Installation | Page 11 of 25 |