4-2 Start-up

1.Turn on the chiller and put it under a process load.

2.Set the controller for the To Process temperature you want, using the Up Arrow button or the Down Arrow button located on the face of the controller.

3.Adjust the High/Low thermostat, located in the electrical enclosure, to 8°F (4.4ºC) below the To Process temperature you want. The High/Low thermostat is factory-set at 42ºF (6ºC). See page 36 for information on resetting the High/Low thermostat.

4.Check the pump amp draw and pump pressure. Make sure that the amp draw reading is within the running load and service factor amps.

5.Operate the chiller, looking for any leaks and listening for unusual noises or vibrations that could indicate improper operation.

Note: Elevated sound level and substantially reduced current draw indicate reverse rotation. After several minutes of operation, the compressor internal protector trips.

4-3 Setting the Process Water Temperatures

Chiller Controller

To change the process water temperature set point, press the Up Arrow button to raise the set point, and press the Down Arrow button to lower the set point.

4-4 Auto-Tuning

E5CK Controller Only

The Auto-Tune function lets you fine-tune the control PID to process requirements. Activate the Auto-Tune function whenever the process under control changes. Don’t be alarmed by control response. It may take the process temperature above and below the set points as many as three times before leveling off and controlling the process set point. Auto-Tuning can take up to 45 minutes and is best done before any product is being run.

1.Press and hold down the AT key for several seconds until the AT indicator flashes.

2.When the AT LED light stops flashing, the controller is tuned and ready for operation.

Eurotherm 3216 Controller

1.Press the INDEX key once. “A. Tune” will be displayed.

2.Press the UP arrow once to display “on”.

3.Press the MODE key once to running condition. The top display will flash “tune”. The tune is complete when the display stops flashing.

4-5 Optional Communications

The communications function allows you to monitor and set controller parameters by a program prepared and running on a host computer connected to the controller.

When using the communications function, you must add on the unit for RS-232C or RS-485 serial communications. The controller communications function allows you to read/write parameters, do operating instructions, and select the setting level.

2-40 HP Portable Chillers

Chapter 4: Operation

35 of 70

Page 34 Page 36
Page 35
Image 35
Sterling A0554831 manual Start-up, Setting the Process Water Temperatures, Auto-Tuning, Optional Communications
Page 34 Page 36

A0554831 specifications

The Sterling A0554831 is a versatile and powerful tool designed for a range of applications, particularly in the industrial and construction sectors. Known for its robust construction and reliability, it has gained popularity among professionals and DIY enthusiasts alike.

One of the main features of the Sterling A0554831 is its durable build quality, which is designed to withstand harsh working conditions. The device typically features a high-strength casing that protects it from dust, moisture, and impact, ensuring longevity even in the most demanding environments. Its ergonomic design allows for comfortable handling, minimizing user fatigue during extended use.

In terms of performance, the Sterling A0554831 is equipped with advanced technologies that enhance its efficiency and functionality. The device is powered by a high-torque motor, delivering impressive power that enables it to tackle heavy-duty tasks with ease. The precision-engineered components ensure consistent performance, making it ideal for tasks that require accuracy and reliability.

Another significant characteristic of the Sterling A0554831 is its versatility. It typically comes with multiple settings and modes, allowing users to adjust the tool according to the specific requirements of their project. Whether drilling, cutting, or fastening, the tool can accommodate various tasks, making it a valuable addition to any toolkit.

Safety features are also a priority with the Sterling A0554831. Many models are equipped with overload protection and safety switches that prevent accidental activation, safeguarding the user during operation. Additionally, some variants may include LED indicators that provide real-time information about battery life or operational status, enhancing overall user experience.

In conclusion, the Sterling A0554831 stands out in the market for its combination of durability, performance, and versatility. With advanced technologies that cater to a wide range of applications and a design focused on user comfort and safety, this tool is an excellent choice for professionals looking for dependable and effective solutions in their work. Whether you are a seasoned professional or a casual DIYer, the Sterling A0554831 is well-equipped to handle your needs with ease and efficiency.
Top Page Image Contents