Sterling manual SSK-30 4.2.4. Cleaning the hopper loader, Maintenance

SSK-30

4.2.4. Cleaning the hopper loader

Open the tension ring (A).

Remove the hopper loader lid.

Check the sieve (B) within the hop- per for material residue. For clean- ing, disassemble the hopper: turn the hopper approx. 1/2 rotation counterclockwise.

Clean the sieve by means of com- pressed-air.

Install the hopper: turn the hopper approx. 1/2 rotation clockwise.

Check the hopper for proper fit.

Clean the hopper loader by means of a vacuum cleaner.

Mount the hopper loader lid.

Close the tension ring (A).

Open the toggle-type fasteners (C) on the flap of the hopper loader.

Check the filter (D) and the filter mat (E) in the flap for material resi-

due. Clean the filter by means of

SSK-30

compressed air.

Close the toggle-type fasteners (C) on the flap of the hopper loader.

Install the hopper loader.

SM3-626

Maintenance 25