Sterling Plumbing 71090120 Technical Information, Installation Notes, Product Diagram, Acclaimtm

ACCLAIMTM

Technical Information

Fixture*:	basin area	top area
Bathing well	42″ (106.7 cm) x	56″ (142.2 cm) x
	16-1/4″ (41.3 cm)	23-3/4″ (60.3 cm)
To overflow	water depth	capacity
	12″ (30.5 cm)	34 gal (128.7 L)

* Approximate measurements for comparison only.

Model	door maximum	door maximum
	width	height
71090110	58-1/2″ (148.4 cm)	56-1/2″ (143.5 cm)
71090120
71090410
71090420
71091110	58-1/2″ (148.4 cm)*	NA*
71091120
71091410
71091420

* Varies with alternative walls.

Installation Notes

Bath only installation is not recommended. Must be installed with available walls.

Install this product according to the installation guide.

Size the drain cutout to fit the drain assembly that will be used.

Stud positioning is critical.

Studs should be positioned roughly as shown for support clip or roofing nail installation.

				30" (76.2 cm)		16"
		6" (15.2 cm)	14"	14"
						(40.6 cm)
		(Typical)	(35.6 cm) (35.6 cm)
	31-1/2"				8"	4" (10.2 cm)
	(80 cm)	31-1/2"	14-1/4"		(20.3 cm)		22-1/4"
	30"	(80 cm)	(36.2 cm)			8"
							(56.5 cm)
	(76.2 cm)	3" (7.6 cm)	Drain Cutout			(20.3 cm)
1-1/2" (3.8 cm)				2" (5.1 cm)
		3-1/2"		D. Drain	8-3/4"
		(8.9 cm)			(22.2 cm)
	54"		60" (152.4 cm) Min
	(137.2 cm)	18"
			60-1/8" (152.7 cm) Max
73-1/2"	1-1/2"	(45.7 cm)
		19" (48.3 cm)				Recommended Support
(186.7 cm)	(3.8 cm)					Clip or Roofing Nail
						Location (5 Total)
						71090120
	15" (38.1 cm)

60" (152.4 cm)

2-3/4" (7 cm)

Overflow Detail

Product Diagram

ACCLAIMTM 60″ (152.4 cm) BATH/SHOWER SYSTEM Page 2 of 2

1020183-4-D