Sterling Plumbing 72130106 Technical Information, Installation Notes, Product Diagram, Ensembletm

ENSEMBLETM

Technical Information

Model	Door maximum	Door maximum
	width	height
72130106	56-5/8″ (143.8 cm)	70-1/2″ (179.1 cm)

Installation Notes

Install this product according to the installation guide.

Size the drain cutout to fit the drain assembly that will be used.

End stud positioning is critical if nailing-in flanges are to be used.

Double studding is recommended for pivot shower door installations.

Studs should be positioned roughly as shown for roofing nail installation.

Attach grab bars at the specified backer board locations only.

16"	14"	16"
	(35.6 cm)
(40.6 cm)		(40.6 cm)

4-1/2"15-13/16"

(11.4 cm) D. (40.2 cm) Drain Cutout

3-5/16" D. 30" (76.2 cm)

(8.4 cm) Drain Hole

60" (152.4 cm) Min

60-1/8" (152.7 cm) Max

1-5/8" (4.1 cm) at Midpoint

77"

(195.6 cm)

Recommended Roofing		End Wall	2" (5.1 cm)
Nail Locations (5 total)			from Grout Line
	3-1/2"		12"
10" (25.4 cm)	(8.9 cm)		(30.5 cm)
4" (10.2 cm)	26"		Grab Bar
8"	(66 cm) 35-1/4"		2"
(20.3 cm)	(89.5 cm)
			(5.1 cm)
			10"
	12" (30.5 cm) or		(25.4 cm)
	24" (61 cm)
	Grab Bar		1" (2.5 cm)
	1" (2.5 cm)		from Grout Line
34"	from Grout Line
(86.4 cm)		Back Wall
1-1/4"
			24"
(3.2 cm)
			(61 cm)
	3-1/2"
	(8.9 cm)		Grab Bar
			2"
			(5.1 cm)
1" (2.5 cm)
from Grout Line
72-1/2"			10"
(184.2 cm)
			(25.4 cm)
	2"
	(5.1 cm)
			2"
			(5.1 cm)

5-1/2"		Note: Right and left end walls are the
(14 cm)	60"
4-1/2"		same, only mirrored.
	(152.4 cm)
(11.4 cm)			Backer board locations

Product Diagram

ENSEMBLETM 60″ (152.4 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS Page 2 of 2

1065813-4-A