Sterling Plumbing 76090120 Technical Information, Required Electrical Service, Installation Notes

ACCLAIMTM

Technical Information

Fixture*:		basin area			top area
Bathing well		44″ (111.8 cm) x			56″ (142.2 cm) x
		16″ (40.6 cm)			23-1/2″(59.7 cm)
To overflow		water depth			capacity
		12″ (30.5 cm)			34 gal (128.7 L)
* Approximate measurements for comparison only.
Pump:			Hp	V		Hz	A
1-speed			1-1/4	120		60	7
Model	door maximum			door maximum
	width			height
76090110	58-1/2″(148.6 cm)			56-1/2″(143.5 cm)
76090120
76091110	58-1/2″(148.6 cm)*			N/A*
76091120

* Varies with alternative walls.

Required Electrical Service

Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI):

Pump 120 V, 15 A, 60 Hz

Installation Notes

Install this product according to the installation guide.

Pump is supplied with a grounding-type plug-in cord. Locate the outlet behind the whirlpool, and within 24″ (61 cm) of the pump.

Pump access opening is required.

Do not disassemble the pump or piping as this could void the warranty.

Size the drain cutout to fit the drain assembly that will be used.

Stud positioning is critical.

Studs should be positioned roughly as shown for support clip or roofing nail installation.

6" (15.2 cm)	14"	30" (76.2 cm)
(Typical)	(35.6 cm)		16" (40.6 cm)

Access

Opening

18" (45.7 cm) W x 15" (38.1 cm) H Access Panel

3-1/2"

(8.9 cm)

		8"
	14-1/4"	(20.3 cm)
31-1/2"(36.2 cm)
(80 cm)	2" (5.1 cm)
	D. Drain

Pump

Motor 8-3/4" (22.2 cm) Location

60" (152.4 cm) Min

60-1/8" (152.7 cm) Max

4" (10.2 cm)	22-1/4"
	(56.5 cm)
8"
(20.3 cm)		31-1/2"
		(80 cm)
30" (76.2 cm)		1-1/2"
Drain Cutout		(3.8 cm)
3" (7.6 cm)		1-1/2"
		(3.8 cm) 2-3/4" (7 cm)

Overflow Detail

Recommended Support Clip or Roofing Nail Location (5 total)

76090120

54"

(137.2 cm)

19"	1-1/2"	73-1/2"
	(3.8 cm)	(186.7 cm)
(48.3 cm)

18"15" (38.1 cm) (45.7 cm)

60" (152.4 cm)

Product Diagram

ACCLAIMTM 60″ (152.4 cm) BATH/SHOWER WHIRLPOOL SYSTEM Page 2 of 2

1016903-4-F