OPERATING THE SCREEN

First time operation

The first time you operate the screen, the protective paper will fall out as the screen unrolls. Once the screen is fully displayed, make sure that no packing paper remains on the screen roll. The screen can be damaged if loose paper remains.

Use the 3-button switch or outboard switching network to control the screen.

When you lower or retract the screen, it will stop at its preset limit. If an obstacle (such as a person or furniture) gets in the path of the screen as it is lowered, you should use the switch control to stop the screen's motion; it will not automatically stop if it hits an obstacle.

In general, when the screen is not in use, you should store it in the fully retracted position.

Caution

Do not operate the motor when any of the following occurs:

KThe unit emits any smoke, heat, abnormal noise or unusual odor.

KThe unit is damaged in some way, such as damage from a water leak.

If any of these situations occur, call a qualified service person.

8

Stewart Filmscreen Corporation

Page 10
Image 10
Stewart Filmscreen Corp B installation instructions Operating the Screen, First time operation