GB

ENGLISH

 

 

 

 

 

Assembly of brush unit

SAFETY INSTRUCTIONS

 

 

Figures and letters in brackets refer to the figures.

 

 

1.Never allow anyone to use the collector without correct instructions.

2.Do not allow children to use the collector.

3.Do not operate the machine too close to naked flames, as the hopper bag and the brushes are highly flammable.

4.Do not attempt to remove objects that have be- come caught up in the brush (e.g. pieces of string) while the brush is rotating.

5.Move at reduced speed over uneven surfaces and on slopes to ensure you do not lose control or the machine does not tip over. Watch out for holes and other hidden dangers.

6.This collector is not intended to be driven on public roads. Watch out for traffic when using the machine close to streets and roads.

7.Ensure that all screws and nuts are tightened so that the collector is in good condition.

8.Stop and check the collector for damage follow- ing a collision. Any damage must be repaired before the collector is used again.

9.Follow all the instructions in this set of instruc- tions regarding maintenance of the collector.

DELIVERY

1.See fig. 3. Undo the existing nuts in the middle on the front of the brush unit (1). Remove the flat washers. Position the connecting rod (15) on the carriage bolts. Install the washers and the nuts. Do not tighten the nuts yet.

2.See fig. 3. Install the strut (9) on the brush unit with the aid of two screws (D) with the heads on the inside of the brush unit. Position two wash- ers (I) and two locking nuts (G) on the outside. Do not tighten the nuts yet.

3.See fig. 3. The installation of the angle (14) de- termines the height of the hopper bag above the ground (see below).

The bottom of the hopper bag must be horizon- tal.

The distance to the ground must be 8-10 cm when the height setting arm (7) is in the central position.

Never allow the hopper bag to drag on the ground.

By installing the angle on the top or bottom of the connecting rod (15), along with the spacers, many different heights can be obtained.

Test which installation best suits the lawnmow- er in question.

Continue assembly as follows:

The delivery comprises a box containing the com- ponents in fig. 2 as well as a bag. The bag contains the installation components in fig. 1. The follow- ing number (x) indicates the quantity of the rele- vant component.

ASSEMBLY

Tools

The following tools are required for assembly:

Adjustable wrench

Box wrenches 3/8 - 7/16 - 1/2 - 9/6

Screwdriver

Pliers

Hammer

Install the angle (14) on the connecting rod with a screw (B) and a locking nut (F) in the front hole. Use a longer screw (A), the bracket (V) and a locking nut (F) in the rear hole. Position the strut (9) under the bracket (V). Do not tight- en the nuts yet.

4.Tighten the nuts that were installed under point 3 above. Do not tighten too hard, as this could deform the tube. Press the connecting rod (15) down so that the strut (9) comes under the bracket (V), and press against the screw (A). Tighten all the screws and nuts that have been installed.

5.See fig. 4. Undo both locking nuts on the height setting tube (6). Remove the dished washers. Install the height setting lever (7) on the tube. Screw in the height setting lever.

6.Press the handle (S) onto the height setting lever with the finger grip facing forwards.

7.See fig. 4. Install the angle (W) on the connect- ing rod with a screw (C) and a locking nut (G).

Page 5
Image 5
Stiga 8211-1227-02 manual Safety Instructions, Delivery, Assembly of brush unit, Tools

8211-1227-02 specifications

The Stiga 8211-1227-02 is an innovative lawn mower designed to deliver efficient grass cutting performance while ensuring ease of use and durability. This machine is engineered with a variety of features that cater to both professional landscapers and homeowners looking for a reliable tool for maintaining their lawns.

One of the standout characteristics of the Stiga 8211-1227-02 is its powerful engine. Equipped with a robust petrol motor, this lawn mower provides excellent cutting power even in challenging conditions. The engine is designed for high efficiency, ensuring that users can complete their mowing tasks with minimal fuel consumption.

The mower is designed with a 46 cm cutting width, making it suitable for medium to large-sized lawns. This width enables a faster mowing process without sacrificing precision. Additionally, the cutting height on the Stiga 8211-1227-02 is adjustable, allowing users to select the perfect height for their grass type and desired finish. The cutting heights can typically be set between 25 to 80 mm, giving flexibility and control over the mowing results.

Another notable feature is the robust chassis construction, which is made from high-quality materials that withstand the rigors of frequent use. The design is not only functional but also includes ergonomic handles that ensure comfort during operation. These handles can often be adjusted for different user preferences, making it versatile for various operators.

The Stiga 8211-1227-02 also incorporates advanced technologies that enhance its cutting performance. Its mulching capability is particularly impressive, allowing grass clippings to be finely chopped and returned to the lawn, promoting natural fertilization and a healthier turf. This technology helps to reduce waste and lessens the need for bagging, offering an environmentally friendly mowing option.

Moreover, this model typically features an easy-start system that simplifies the ignition process, enabling quick and hassle-free operation. The inclusion of large rear wheels enhances maneuverability, especially on uneven terrain, providing the user with improved stability and control.

With its combination of power, efficiency, and user-friendly features, the Stiga 8211-1227-02 is an excellent choice for those seeking a high-quality lawnmower that meets the demands of both professional and residential mowing. Whether you have a sprawling yard or a quaint garden, this mower promises to deliver exceptional grass cutting results time after time.