English / USA

:Remove the filter element and inspect it – replace if dirty or damaged – do not clean.

:Install filter element in the cover.

:Refit the filter cover.

Motor Management

Adjusting the Carburetor

Exhaust emissions are controlled by the design of the fundamental engine parameters and components (e.g. carburation, ignition, timing and valve or port timing) without the addition of any major hardware.

H

L

1

 

LA

250BA039 KN

General Information

The carburetor comes from the factory with a standard setting.

This setting is designed to provide an optimum fuel-air mixture under most operating conditions.

With this carburetor it is only possible to adjust the engine idle speed within fine limits.

38

FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R