English / USA
Definitions
1.Fuel Filler Cap
For closing the fuel tank..
2.Carburetor Adjusting Screws For tuning the carburetor.
3.Starter Grip
The grip of the pull starter, which is the device to start the engine.
4.Spark Plug Boot
Connects the spark plug to the ignition lead.
5.Muffler
(with spark arresting screen) Reduces exhaust noises and diverts exhaust gases away from operator.
6.Bike Handle
For easy control of the machine with both hands during cutting work.
7.Throttle Trigger
Controls the speed of the engine.
8.Slide Control
For starting throttle, run and stop. Keeps the throttle partially open during starting, switches the engine’s ignition off to stop the engine.
9.Throttle Trigger Interlock Must be depressed before the throttle trigger can be activated.
10.Throttle Cable Retainer Secures the throttle cable to the drive tube.
11.Carrying Ring
Connects the brushcutter to the harness.
12.Fuel Pump
Provides additional fuel feed for a cold start.
13.Rotary Choke Knob
Eases engine starting by enriching mixture.
14.Air Filter Cover
Encloses and protects the air filter.
15.Fuel Tank
For fuel and oil mixture.
16.Machine Support
For resting machine on the ground.
17.Handle Support
Connects the drive tube and bike handle.
18.Wing Screw
Secures handlebar in the selected position.
19.Loop Handle
For easy control of machine during cutting work.
20.Barrier Bar
Helps maintain clearance between cutting tool and feet and legs of operator.
48 | FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R |