English / USA
Specifications
Engine
Model | FS 120 | FS 200 | FS 250 |
Single cylinder |
|
|
|
engine |
|
|
|
Displacement: | 1.88 cu.in | 2.22 cu.in | 2.45 cu.in |
| (30.8 cm3) | (36.3 cm3) | (40.2 cm3) |
Bore: | 1.38 in (35 mm) | 1.50 in (38 mm) | 1.57 in (40 mm) |
Stroke: | 1.26 in (32 mm) | 1.26 in (32 mm) | 1.26 in (32 mm) |
Engine power to ISO 8893: | 1.8 bhp (1.3 KW) | 2.2 bhp (1.6 KW) | 2.2 bhp (1.6 KW) |
| at 9000 rpm | at 9000 rpm | at 9000 rpm |
Idle speed: | 2,800 rpm |
Engine cutoff speed |
|
(nominal): | 12,300 rpm |
Max. output shaft |
|
speed (cutting tool) |
|
- with bike handle | 8,790 rpm |
- with loop handle | 9,960 rpm |
EPA / CEPA:
The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.
Category:
A = 300 hours, B = 125 hours, C = 50 hours
CARB:
The Emission Compliance Period used on the CARB Air Index Label indicates the terms:
Extended = 300 hours, Intermediate = 125 hours, Moderate = 50 hours
Ignition System
Type: Electronic magneto ignition with electronic speed governor
Spark plug (resistor
type):Bosch WSR 6 F,
NGK BPMR 7 A or Champion RCJ 6Y
Electrode gap: | 0.02 in (0.5 mm) |
Spark plug thread: | M 14 x 1.25; |
| 0.37 in long |
| (9.5 mm) |
Fuel System
Carburetor: All position diaphragm carburetor with integral fuel pump
Air filter: | Paper filter |
| element |
Fuel tank capacity: 21.6 fl.oz (0.64 L)
Fuel mix:See "Fuel"
Rewind Starter
Starter rope:
Ø0.11 in (3,0mm), 33.5 in ( 850 mm) long
50 | FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R |