English

Short-term storage

Wait for engine to cool down. Keep the machine with a full tank of fuel in a dry place, well away from sources of ignition, until you need it again.

Long-term storage

See "Storing the machine"

Oil Quantity Control

Varying cutting lengths, types of wood and work techniques require varying amounts of oil.

1

0011BA034 KN

The oil flow can be adjusted as needed using the adjusting screw (1) on the top of the machine.

Ematic position (E), medium oil flow –

NTurn adjusting screw to "E" (Ematic position)

To increase oil flow –

Nturn the adjusting screw clockwise To reduce oil flow –

Nturn the adjusting screw counterclockwise

The chain must always be coated with oil.

Taking Care of the Guide Bar

2

 

 

KN

1

3

143BA026

 

NTurn the bar over – every time you sharpen the chain and every time you replace the chain – this helps avoid one-sided wear, especially at the nose and underside of the bar.

NRegularly clean the oil inlet hole (1), the oilway (2) and the bar groove (3).

NMeasure the groove depth – with the scale on the filing gauge (special accessory) – in the area used most for cutting.

36

MS 201, MS 201 C