English / USA
At very low outside temperatures:
:Allow engine to warm up at part throttle.
:Change over to winter operation if necessary - see “Winter Operation”.
If the engine doesn’t start:
If you did not move the Master Control lever to "Warm Start" nquickly enough after the engine began to fire, the combustion chamber has flooded.
143BA012 KN
:Pull the hand guard back toward the front handle:=
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake before accelerating engine. High revs with the chain brake engaged (chain locked) will quickly damage the powerhead and chain drive (clutch, chain brake).
:Observe safety precautions.
:Always check operation of chain lubrication before starting work.
To shut down the engine:
:Move Master Control lever to $
If fuel tank has been run until dry and then refueled:
:Press in decompression valve.
:Pull starter rope several times until fuel line is primed.
:Now start the engine.
145BA027 K
:Open the twist lock and remove the carburetor box cover.
1 | 2 |
|
175BA002 KN
:Take out the baffle plate (1) upwards.
:Pull off the spark plug boot (2).
MS 440, MS 440 W, MS 440 C | 37 |