English / USA
Mounting the Depth Limiter
: Mount the guide bar and the saw chain - see saw's instruction manual.
Fit the spacer washers (4), cover* (5) and spiked bumper (5) on the screws and secure with the locknuts (6).
:Slip the depth limiter guide (1) over the special guide bar
:and insert the screws (2).
:Push the sliding sleeve (3) over the guide.
:Fit the star knob (4) and washer (5).
:Tighten the screws (2).
:Pull the sliding sleeve (3) forward as far as stop.
:Tighten down the star knob (4) firmly.
*See “Guide to Using this Manual“
30 | Rescue Saw |