English
STOP
When the engine has turned over for the first time
0
1
4 
2
| STOP |
1 | 0 |
SC | |
| 550BA002 |
NMove the Master Control lever (1) to the position starting acceleration n
133BA001 K
NPress the button, the decompression valve will be opened
The decompression valve is closed automatically when the engine starts for the first time. For this reason, press the button again before each additional starting procedure.
3 | SC |
| 550BA001 |
NPush the hand guard (1) forwards – the saw chain is blocked
NSimultaneously press the throttle trigger interlock (2) and throttle trigger (3) – set master control lever (4)
Position choke shutter closed l
–if engine is cold (even if the engine has stalled during opening of throttle after starting)
Position starting acceleration n
–if engine is warm (once the engine has been running for approx. one minute)
NHold and start the chain saw
NPress the button on the decompression valve
NHold and start the chain saw
Once the engine is running
|
| STOP |
1 |
| 0 |
| SC | |
| 2 | 550BA003 |
|
|
NBlip the throttle trigger (2); the Master Control lever (1) jumps to the operating position Fand the engine begins to idle
32 | MS 880 |