English
1
171BA003 KN
Nif engine trouble occurs, first check whether use of intake air pre- heating is necessary
Nat higher temperatures, close the opening with stoppers (1) (special accessory)
Starting / Stopping the Engine
Positions of the Master Control lever
STOP
0
001BA140 KN
Stop 0 – engine off – ignition is switched off
Operating position F– engine is running or can start
Warm start n – this position is for starting the warm engine – the Master Control lever returns to the operating position when the throttle trigger is squeezed
Cold start l– this position is for starting the cold engine
Adjust Master Control lever
The throttle trigger interlock and throttle trigger must be pressed simultaneously to adjust the Master Control lever from operating position Fto starting acceleration nor choke shutter closed l.
Position choke shutter closed l
–If engine is cold
–if the engine stalls during opening of throttle after starting
–the fuel tank has run empty (engine stalled out)
Position starting acceleration n
–if engine is warm (once the engine has been running for approx. one minute)
–when engine begins to fire
–after ventilation of the combustion chamber, if the engine was flooded
Holding the chain saw
There are two ways to hold the chain saw during starting.
30 | MS 880 |