Stinger MC2 Preparing For Operation

MC2 Power Systems User's Guide Chapter 3: 35 Amp-Hour Series
Preparing For Operation
Parts Listing
• (1) Power system unit (Fig 16)
• (1) Cord Set (Fig 17 and 18)
Fig 16: MC2 Power System Series 35 Amp-Hour
1 Unpack components carefully, inspecting for damage. WARNING: Power System is
HEAVY!
2 Confirm that the Power Output Disconnect Switch is in the ‘ON’ position. For more
information, see “Identifying the Power System.” Verify that the green LED power
indicators light up beside the outputs.
Note:
The number of LEDs to light up will vary based upon the number of outputs
purchased.
3 Charge your MC² Power System using a Stinger Medical supplied cord set (Fig 17
and 18) for 24 hours prior to use. For more information, see “Charging the Power
System.”
Fig 17: Curly cord Fig 18: Cord reel
1110227 Revision 2
November 2006 13