2.5 MIX PUMP

A.Mix Pump Hose Installation

Follow the steps below to install the mix pump hose.

1.Turn pump on.

2.Feed one end of mix pump hose into the entering or pick-up hose side (left) of black cover.

3.Gently push the hose into the black cover until it begins to feed.

6" (15cm)

Figure 6. Mix Hose Installation

4.Allow the hose to feed itself thru the pump until 6" (15cm) remains on the entering side.

5.Turn pump off.

6.Connect mix pump hose to pickup hose adapter using small hose clamp.

CAUTION

DO NOT TWIST MIX PUMP HOSE.

7.Turn pump on.

8.Allow remaining 6" (15cm) of tubing to feed thru pump until hose adapter prevents further feeding.

9.Turn pump off.

10.Connect free end of mix pump hose to 3-way Tee as shown in Figure 7. When all connections are complete the 3- way Tee must be lower than the black pump housing. Figure 8.

5