B.Connect 1/2 inch (12,7mm) I.D. plastic food grade tubing to mix check valve (Item 7) and then to the mix container. Observe check valve flow arrow.
Secure with hose clamps. Then place assembly thru hole in cover and install retainer clip. See Figure 9.
C.Connect 1/2 inch (12,7mm) I.D. plastic food grade tubing between the large port of air/mix tee and refrigerated mix transfer line. Secure with large hose clamp or equivalent. See Figure 9.
CAUTION
AIR/MIX TEE MUST REMAIN BELOW THE
BLACK COVER/CLAMP. IF THE TEE IS
ABOVE THE PUMP MIX WILL DRAIN TO THE
AIR COMPRESSOR RESULTING IN PUMP
DAMAGE.
D.Connect mix low cords. Figure 9.
Figure 7. Mix Pump
6