Installation

13

 

 

8.Reconnect any system or peripheral cables removed earlier.

9.Turn ON power to the computer. If the installation has been successful, and all the cables have been properly attached, the system should boot normally. Although the computer may not recognize the SATA DE110 yet, the front panel display on the SATA DE110 receiving frame should illuminate.

10.The new drive may need to be formatted or initialized prior to use with the operating system and applications software. Refer to the drive and/or computer manufacturer's documentation for formatting information.

Selecting the Unit ID Number

1.Verify that power is turned ON to the SATA DE110 “universal” receiving frame by turning on your computer. A number will appear in the unit ID display window if the carrier is locked in place.

2.Unlock the SATA DE110 drive carrier and remove it from the receiving frame. A "u" will be displayed initially when the unit is unlocked but will return to a number when the carrier is removed from the receiving frame.

WARNING: Unlocking the carrier unit switches DC power OFF to the drive. Since disk drives require a short amount of time to spin down, allow about 15 seconds before pulling the carrier unit out of the receiving frame to avoid possible damage to the drive.

3.Use the alignment tool supplied with the SATA DE110 to select the ID number of the disk drive. Refer to Figure 9 for the location of the ID Select Switch inside the receiving frame.

NOTE: The unit ID number display is for ID display purposes only.

4.After you have selected an appropriate unit ID number, replace the SATA DE110 carrier in the receiving frame, and LOCK IT IN PLACE.

NOTE: The lock on the SATA DE110 carrier functions as a lock and a DC power switch for the carrier unit. The lock must be engaged in order to supply power to the carrier and installed drive.

5.Reboot the computer. The new disk is now ready for use, although it may have to be formatted or initialized prior to use with your operating system and applications software.

SATA DE110 User's Guide - Rev. A03

StorCase Technology, Inc.

Page 19 Page 21
Page 20
Image 20
StorCase Technology DE110 manual Selecting the Unit ID Number
Page 19 Page 21

DE110 specifications

StorCase Technology’s DE110 is a versatile and robust storage solution designed to cater to the growing demands of data management and protection in various industries. This high-performance device excels in providing reliable and efficient data storage options for both professionals and businesses alike.

One of the standout features of the DE110 is its capacity for high-speed data transfer. Equipped with cutting-edge interface technologies, it integrates seamlessly with both USB 3.0 and eSATA connections, ensuring swift data access and transfer rates that significantly reduce time spent on data management tasks. This is particularly beneficial for users who work with large files and require quick retrieval times.

In terms of storage capacity, the DE110 supports a wide range of hard drives, accommodating single or multiple drives depending on the user’s needs. It typically supports 2.5-inch and 3.5-inch SATA drives, allowing users the flexibility to choose storage options that best fit their requirements. The device can handle a substantial amount of data, ensuring that users have enough space for their files, applications, and backups.

Durability is a key characteristic of the DE110. Designed with a sturdy chassis, this storage device ensures that sensitive data is well-protected from physical damage, making it suitable for use in both office environments and on-the-go applications. The internal cooling system further enhances its longevity by preventing overheating, thus maintaining optimal performance.

The DE110 is also user-friendly, requiring minimal technical knowledge to set up and operate. Its plug-and-play capability allows for quick installation, enabling users to begin their data storage and management tasks almost immediately. The device is compatible with various operating systems including Windows, macOS, and Linux, ensuring versatility regardless of the user’s platform preference.

Another important aspect of the DE110 is its data security features. It supports various RAID configurations, including RAID 0, RAID 1, and JBOD, providing users with options for data redundancy and increased performance. This ensures that sensitive information is safeguarded against loss due to drive failure or other unexpected issues.

Overall, the StorCase Technology DE110 is a powerful, reliable, and flexible storage solution that meets the needs of today’s data-driven world. With its combination of high-speed connectivity, expansive storage capabilities, robust construction, user-friendly design, and advanced data protection features, the DE110 is an excellent choice for anyone looking to enhance their data storage and management processes.
Top Page Image Contents