MAINTENANCE and SERVICING
4.15This is a list of the maintenance products you may need to use
Task | Product name | Stovax Code | |
Number | |||
|
| ||
Glass cleaning | Stove glass cleaner 500ml | 4111 | |
| (wipe on) | ||
|
| ||
|
|
| |
| Stove glass cleaner | 4130 | |
| (spray on) | ||
|
| ||
|
|
| |
Preventing | Protector (15 sachets) | 7002 | |
of creosote in flue | Protector (1kg tub) | 7025 | |
|
|
| |
Sealing flue | Fire Cement (500g tub) | 2020 | |
pipe joints | Fire Cement (600g cartridge) | 2021 | |
|
|
| |
Thermolac Black | 2019 | ||
| (400ml aerosol) | ||
|
| ||
|
|
| |
| Thermolac Black | 2057 | |
| (9200ml | ||
|
| ||
Cleaning matt | Colloidal black (85ml) | 7000 | |
black stoves |
| ||
|
| ||
|
|
| |
Protecting your | Heat resistant leather gloves | 4008 | |
hands |
| ||
|
| ||
|
|
| |
Door sealing rope | 14mm Black rope seal | 5000 | |
| (handy pack) | ||
|
| ||
|
|
| |
| 14mm Black rope seal | 4670 | |
| (25m reel) | ||
|
| ||
Glass sealing tape | 3mm Black rope seal | 4975 | |
| (handy pack) | ||
|
| ||
|
|
| |
| 3mm Black rope seal | 4974 | |
| (25m reel) | ||
|
| ||
|
|
| |
Fixing rope seal | Thermic seal glue | 5037 | |
| (50ml bottle) | ||
|
| ||
|
|
| |
Ash Clean | Vaccuum Cleaner Attachment | 2091 | |
|
|
|
4.16These products, all available from your local Stovax dealer, along with regular maintenance and use of correct fuels, will help you to keep your stove in the best condition.
4.17If you require more information about Stovax group products, visit ouor website www.stovax.com.
4.18When using the stove for the first time again it is best to burn the fire at a low output for the first day of use. This will allow the new seals to settle and all new fixing glues and paint to fully cure.
4.19During this time, the stove may give off some unpleasnt odours, and we recommend that you keep the room well ventialted during thsi period to avoid a
4.20If you require help, your local Stovax dealer will be able to carry out all of your service and maintenance requirements for a reasonable cost.
5.REMOVAL OF THE LOG GUARD
5.1Remove the log guard by lifting clear of the supporting brackets and rotating to clear the sides of the door opening. The stove should not be used without the log guard in position.
6.FITTING AND REMOVAL OF BAFFLE
6.1To maintain efficient combustion the stove is fitted with a baffle in the top of the firebox.
6.2Allow the stove to cool fully before removing the baffle system.
6.3To remove the baffle, first remove the log guard from the stove to give access to the firebox.
6.4Remove the baffle by lifting the front edge to clear the support bars, then pull the baffle forward to disengage the rear edge from the location above air inlet holes. Rotate the baffle to remove from the firebox through the door opening.
Support Pin | PR7214 |
|
6.5The replacement of the system is the reverse of the previous operations, ensuring it is replaced the correct way around.
Front
PR7076
10