Futura
Covering the following frames: Futura: Model number 8687
USER INSTRUCTIONS
1. CONTROLS ACCESS
To access the fire's controls with a Futura Frame fitted:
•Push the control panel firmly in the centre to release the magnetic catch
Details of the controls (and Replacing the Batteries, if applicable) are given in the User section of the fire’s Instruction manual.
2. CLEANING THE FRAME
Only clean the frame when it is cold.
•Clean the glass with a
INSTALLATION
INSTRUCTIONS
Covering Models 8687
1.GENERAL
1.1These instructions are supplemental to, and must be read in conjunction with, the Installation Instructions (PR0741 for
1.2Fitting of the Futura frame must be carried out after the appliance has been fully installed and commissioning tests completed.
2.PREPARATION OF WALL FIXING FOR FUTURA
The Futura is in two parts: a back panel which fits to the wall; a front panel that hooks onto the fixed back panel.
4.1 Back Panel
The back panel hooks onto a wall bracket (supplied).
•Find the fire's centre point across its width and mark
•Mark 1081 mm from the hearth or base of appliance (if wall mounted) to establish the correct height
•Centre the wall bracket above the fire and at the distance from the hearth or base of appliance (if wall mounted) shown in Diagram 1
1 |
| height measured to the |
|
| centre top of bracket = |
|
| 1081mm |
|
| |
|
|
centre point
1081mm
AR2170
4.2To fix the wall bracket:
•Secure the bracket into place with the screws supplied
•Lift and hook the back panel onto the bracket
•Centre the back panel, Diagram 2
•Secure the back panel through the firebox using the fixings next to the controls, Diagram 3
2
AR2171
3
AR2174
3