MS20H/MS20E MIXER —TRAILER SAFETY GUIDELINES
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows:
1.Start all wheel lug nuts by hand.
2.Torque all lug nuts in sequence. See Figure 8. DO NOT torquethewheellugnutsallthewaydown.Tighteneachlug nut in 3 separate passes as defined by Table 6.
Table 6. Tire Torque Requirements
Wheel Size | First Pass | Second Pass | Third Pass |
| |||
|
|
|
|
12" | |||
|
|
|
|
13" | |||
|
|
|
|
14" | |||
|
|
|
|
15" | |||
|
|
|
|
16" | |||
|
|
|
|
3.Afterfirstroaduse,retorquealllugnutsinsequence.Check all wheel lug nuts periodically.
NOTE
NEVER! use an pneumatic air gun to tighten wheel
lug nuts. | Figure 8. Wheel Lug Nuts Tightening Sequence |
MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV. #3 (08/10/06) — PAGE 21
