Stow manual Stow SFCS-16 Floor Covering Scrapper

TABLE OF CONTENTS
STOW SFCS-16 Floor Covering Scrapper
Table Of Contents	3
Parts Ordering Procedures	4
Notice to Operators	5-6
Operator Instructional Data Sheet	7
Safety Precautions	8
Preparation	8
Operation	9
Maintenance, Repair and Storage	10
Assembly	11
Removing the Floor Covering Scrapper from the Pallet	11
Installation of the Adjustable Section of the Operator Handle	11
Before Starting the Motor	12
Theory of Operation	12
Blade Configurations, Accessory Attachments and Applications	12
Installing a Blade or the Ceramic Tile Ripper Attachment to the Floor Covering Scrapper	14
Removing a Blade or the Ceramic Tile Ripper Attachment from the Floor Covering Scrapper	17
Operation	19
Operational Disclaimer	19
California Proposition 65 Disclaimer	19
Transporting the Floor Covering Scraper	20
Adjusting the Operator Handle Height	21
Starting the Floor Covering Scraper On the Jobsite	21
Operating the Floor Covering Scraper On the Jobsite	24
Stopping the Floor Covering Scraper On the Jobsite	27
Operational Parameters and Techniques for the Floor Covering Scraper	28
Service	29
Preventative Maintenance Check List	29
Lubrication Requirements	30
Electric Motor Service	31
Troubleshooting	32
Electric Motor	32
Operational Problems	32
Storage	33
Specifications	34
Explanation of Codes in Remarks Column	36
Recommended Spare Parts	37
Component Parts Drawings
Adjustable Axle Assembly	38-39
Replacement Cutting Blades Assembly	40-41
Frame Assembly	42-45
Operator Handle Assembly	46-47
Decals	48-49

SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 3