Air Cleaner Components - See Figure 13.

1. Air Cleaner Cover

2. Latch Spring

3.Lever Latch

4. Latch Lever Pin

5. Wing Nut

6. Inner Air Cleaner Cover

7.Precleaner Element

8.Air Cleaner Element

9. seal

10. Air Cleaner Bracket

11.Air Cleaner Base

12.Air Cleaner Base Gasket

13.Intake Manifold Gasket

14.Intake Manifold

15.screw

Paper Element Service (StandardType)

Check the paper element every 100 hours of operation (more often under extremely dusty or dirty conditions). Replace the element as necessary.

Refer to the following steps and to Figure 13:

1.Release the latches located on either side of the air cleaner cover (Figure 13), and remove the cover.

2.Remove the wing nut, element cover, seal and air cleaner element.

3.Remove the precleaner (if so equipped) from the paper element.

4.Do not wash the paper element or use pressurized air, as this will damage the element. Replace a dirty, bent, or damaged element with a new element as prescribed by the engine manufacturer. Handle new elements carefully; do not use if the sealing surfaces are bent or damaged.

5.Reinstall the seal, paper element, precleaner, element cover, flat washer and wing nut.

6.Reinstall the air cleaner cover and secure the latches.

Make sure the correct depth air

NOTE cleaner element and rubber seal are used for the engine spec. involved.

STR46SP — MAINTENANCE

Air Cleaner - Components to Check

Whenever the air cleaner cover is removed, or the paper element or precleaner is serviced, check the following:

■Air Cleaner Element Cover and Seal - Make sure the element cover is not bent or damaged. Make sure the wing nut, washer and seal are in place to ensure the element is sealed against leakage.

■Air Cleaner Base - Make sure the base is secured tightly to carburetor and not cracked or damaged.

■BreatherTube - Make sure the tube is installed to both the air cleaner base and the breather cover.

Disassembly and Reassembly (Standard Type)

If the base plate on the standard type must be removed, proceed as follows:

1.Remove the air cleaner components as described previously.

2.Remove the hex flange screws securing the bracket and base.

3.Remove the base and gasket. Carefully pull the rubber breather tube through the base

4.Remove the tube from under side of base if necessary.

5.Reverse the foregoing steps to reinstall new or service components.Tighten screw to 9.9 N-m (88 in. lb.) torque.

Air Intake/Cooling System

To ensure proper cooling, make sure the grass screen and fan cooling fins and other external surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty or dirty conditions:

1.Remove the blower housing and other cooling shrouds.

2.Clean the cooling fins and external surfaces as necessary.

3.Make sure the cooling shrouds are reinstalled.

CAUTION

Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed, will cause engine damage due to overheating.

STR46SP • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (08/01/06) — PAGE 27

Page 26 Page 28
Page 27
Image 27
Stow STR46SP Make sure the correct depth air, Air Cleaner Components to Check, Disassembly and Reassembly Standard Type
Page 26 Page 28

STR46SP specifications

The Stow STR46SP is a premium storage solution designed for efficiency and functionality, perfect for various applications in both residential and commercial settings. With a focus on durability and ease of use, the STR46SP is an excellent addition to any home or workspace needing effective organization.

One of the standout features of the Stow STR46SP is its robust construction. Made from high-quality materials, this storage unit is designed to withstand the rigors of daily use while maintaining a sleek and modern aesthetic. The frame is constructed from heavy-duty steel, providing stability and strength, while the shelving is crafted from high-density polyethylene that is resistant to impacts, stains, and scratches.

The storage unit boasts a generous capacity, with ample space to accommodate a wide variety of items. With its multiple shelves, the STR46SP allows for efficient categorization and storage, whether you are organizing tools in a garage, files in an office, or supplies in a workshop. Its adjustable shelving system ensures that you can customize the storage dimensions to meet your specific needs, allowing for both tall and short items to be stored without inconvenience.

Another key characteristic of the Stow STR46SP is its mobility. Equipped with heavy-duty wheels, the storage unit can be easily moved from one location to another, allowing for flexible usage in any environment. This feature is particularly beneficial in settings where space is at a premium, enabling users to reposition the unit as required.

The Stow STR46SP also integrates smart design technologies, such as a lockable door mechanism. This provides added security for stored items, ensuring that valuable tools and documents are protected. The unit's ventilation design prevents moisture build-up, prolonging the life of stored materials and keeping everything fresh.

In conclusion, the Stow STR46SP is a versatile and durable storage solution ideal for anyone looking to maximize their space efficiency. With its high-quality construction, ample storage capacity, adjustable shelving, and mobility features, this unit is designed to cater to a wide range of storage needs. Whether in a home garage, office, or workshop, the STR46SP proves to be a reliable and practical investment for effective organization and convenience.
Top Page Image Contents