STR46SP General Information | Stow specification

STR46SP — GENERAL INFORMATION

STR46 SERIES Ride-On PowerTrowel Familiarization

The STR46 SERIES Ride-On Power Trowel is designed for the floating and finishing of concrete slabs.

Take a walk around your trowel. Take notice of all the major components (see Figures 2 and 3, pages 20 and 21) like the engine, blades, air cleaner, fuel system, fuel shut-off valve, ignition switch etc. Ensure engine and gearbox oil levels are within proper operating range.

Read all the safety instructions carefully. Safety instructions will be found throughout this manual and on the machine. Keep all safety information in good, readable condition. Operators should be well trained on the operation and maintenance of the trowel.

Look at the operator control levers. Grasp the control levers and move them around a bit. Observe how moving the control levers cause the gearboxes and frame to move.

Notice the foot pedal which controls the engine and blade speed. Also take a look at the main driveline of the trowel. Take note and reference how the belts look, this is the way the belts should look when adjusted properly.

Before using your trowel, test it on a flat watered down section of finished concrete.This trial test run will increase your confidence in using the trowel and at the same time it will familiarize you with the trowel’s controls and indicators. In addition you will understand how the trowel will handle under actual conditions.

Engine

This trowel is equipped with an air cooled 27 HP Kohler gasoline engine. Refer to the engine owner’s manual for specific instructions regarding engine operation.This manual is included with the trowel at the time of shipping. Please contact the STOW parts department if a replacement manual is required.

Blades

The blades of the trowel finish the concrete as they are swirled around the surface. Blades are classified as combination (10 or 8 inches wide) and finish (6 inches wide).This trowel is equipped with four blades per rotor equally spaced in a radial pattern and attached to a vertical rotating shaft by means of a spider assembly.

Figures 2 and 3 show the location of the controls, indicators and general maintenance parts. Each control may perform more than one function.The functions of the controls or indicators are on pages 20 and 21.

Gearboxes

The STR46 Series Ride-On Power Trowel uses two separate gearbox assemblies that are enclosed in rugged cast aluminum gear cases.

The gearbox casing has a large oil capacity allowing optimum lubrication to critical points.

Steering Assist

Dual control levers located in front of the operator's seat are provided for steering the trowel.The control levers are linked to two spring loaded cylinders.

Push the left control lever forward and pull the right control lever backward and the trowel will rotate clockwise on approximately a center axis. Pull the left control lever backward and push the right control lever forward and the trowel will rotate counterclockwise. See Table 4 on page 26 for a complete description on the control levers directional positioning.

Constant Velocity Joints (CV-Joints)

Constant velocity joints insure the efficient transfer of power to the drive shaft and maintain the timing of the gearboxes without any chance of slippage.

Training

For training, please use the “TRAINING CHECKLIST” located in the front of this manual (Page 8).This checklist is not intended to be a substitute for proper training but will provide an outline for an experienced operator to provide training to a new operator.

STR46SP • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (08/01/06) — PAGE 17

STR46SP specifications

The Stow STR46SP is a premium storage solution designed for efficiency and functionality, perfect for various applications in both residential and commercial settings. With a focus on durability and ease of use, the STR46SP is an excellent addition to any home or workspace needing effective organization.

One of the standout features of the Stow STR46SP is its robust construction. Made from high-quality materials, this storage unit is designed to withstand the rigors of daily use while maintaining a sleek and modern aesthetic. The frame is constructed from heavy-duty steel, providing stability and strength, while the shelving is crafted from high-density polyethylene that is resistant to impacts, stains, and scratches.

The storage unit boasts a generous capacity, with ample space to accommodate a wide variety of items. With its multiple shelves, the STR46SP allows for efficient categorization and storage, whether you are organizing tools in a garage, files in an office, or supplies in a workshop. Its adjustable shelving system ensures that you can customize the storage dimensions to meet your specific needs, allowing for both tall and short items to be stored without inconvenience.

Another key characteristic of the Stow STR46SP is its mobility. Equipped with heavy-duty wheels, the storage unit can be easily moved from one location to another, allowing for flexible usage in any environment. This feature is particularly beneficial in settings where space is at a premium, enabling users to reposition the unit as required.

The Stow STR46SP also integrates smart design technologies, such as a lockable door mechanism. This provides added security for stored items, ensuring that valuable tools and documents are protected. The unit's ventilation design prevents moisture build-up, prolonging the life of stored materials and keeping everything fresh.

In conclusion, the Stow STR46SP is a versatile and durable storage solution ideal for anyone looking to maximize their space efficiency. With its high-quality construction, ample storage capacity, adjustable shelving, and mobility features, this unit is designed to cater to a wide range of storage needs. Whether in a home garage, office, or workshop, the STR46SP proves to be a reliable and practical investment for effective organization and convenience.

Stow manual STR46SP General Information

Models: STR46SP