OPERATION
stations are stored into the corresponding preset number button positions.
-Program Scanning
Press AMS button (18) shortly to scan preset stations. When the signal strength level of a station is more than the threshold level of the stop setting, the radio will hold at that preset number for several seconds, then releases and searches again.
•STATION STORING
Press any one of the preset buttons
(14) M1 to M6 to select a station that has already been stored into the memory. You may store 6 stations in each of the bands (F1, F2 , F3 or AM). To store a station into the memory, select the desired band using BND/LOU button (13). Either use the AUTO or MANUAL tuning mode to select the station you wish to enter into memory and then press and hold the M1 memory button (14) until the unit beeps to indicate the station has been stored into memory. Repeat this procedure for each of the remaining memory button positions (M2 to M6) and then move to the next band and repeat the procedure.
•MONO/STEREO
Press MON button (1) to select mono or stereo mode. You can sometimes improve reception of distant stations by selection mono operation.
CD OPERATION
•SWITCHING TO CD MODE
If there is no CD inserted in the driver: Press OPEN/CLOSE button (7) to slide the faceplate down and reveal the disc compartment slot (5). Gently insert the CD with the printed side facing up into the CD compartment until you feel some resistance. The CD is drawn into the CD player automatically. CD playback then begins. Press the OPEN/CLOSE button (7) to raise the faceplate back into position.
If a CD is already inserted in the unit: Press the MOD button (6) repeatedly until the CD mode display appears.
•SELECTING TRACKS
Press 
button (16) or 
button (17) to move to the previous track or the following track. Track number shows on display.
Hold 
button (16) or 
button (17) to fast reverse or fast forward. CD play starts from when you release the button.
•PAUSING PLAYING
Press PAU button (20) to pause CD player. Press it again to resume play.
•PREVIEWING ALL TRACKS
Press SCN button (21) to play the first several seconds of each track on the current disc. Press again to stop introplay and listen to complete track.
•REPEATING THE SAME TRACK Press RPT button (22) to continuously repeat the same track. Press it again to stop repeat.
•PLAYING ALL TRACKS IN RANDOM Press SHF button (23) to play all tracks on CD in random order. Press again to cancel the function.
•EJECTING A DISC Method (A):
When a disc is inserted into the disc slot
(5)and playing, press OPEN/CLOSE button
(7)to slide down the front panel, then press and hold OPEN/CLOSE button (7) for several seconds. CD will stop playing and eject from the disc slot. Press OPEN/CLOSE button (7) again and the front panel will close. Method (B):
When a disc is inserted into the disc slot
(5)and playing, press and hold OPEN/CLOSE button (7) for several seconds to slide down the front panel and eject the disc from the disc slot, then press OPEN/CLOSE button
(7)to close the front panel.
MP3 OPERATION
•SWITCHING TO CD (MP3) MODE
If there is no MP3 disc inserted in the player:
Press OPEN/CLOSE button (7) to slide the faceplate down and reveal the disc compartment slot (5). Gently insert the MP3 disc with the printed side uppermost into the disc slot (5) until you feel some resistance. The MP3 disc is drawn into the player automatically. The MP3 playback begins. Press the OPEN/CLOSE button (7) to raise the faceplate back into position.
If a MP3 disc is already inserted in the player: Keep pressing MOD button (6) shortly until the CD (MP3) mode display appears.
•SELECTING TRACKS IN SINGLE STEP Press 
button (16) or 
button (17) to move to the previous track or the following track. Track number shows on display.
•PAUSING PLAYING
Press PAU button (20) to pause MP3 player. Press it again to resume play.
10
